OptoTest’s OP480MT MultiFibre Polarity Tester automates testing for broken and crossed fibres with immediate and easy-to-read results. When used in conjunction with the OP280MT Ribbon Visual Fault Locator, the OP480MT quickly displays results for many different ribbon configurations and channel counts including type A, B, C, and Universal. Additionally, it can be configured with a user-defined custom mapping via utility software.
Since it uses a non-contact method of testing, the OP480MT reduces the number of times a cable must be connected during production. With fast testing time and customizable configurations, it can greatly reduce major bottlenecks in the production process. Once connected, polarity and continuity are identified almost instantaneously.
The OP480MT and OP280MT are available individually or as part of a kit—the OP-POLARITYKIT-12—which will include the OP480MT, OP280MT, launch and receive optical cables for male and female, mating adapters, cleaning tools, software, portable power pack in a carrying case.
- Portable
- Fully automated
- Tests up to 12 channels in under a second
- No physical contact during measurement
- Works with single mode & multimode cables
- Configurations to test multiple pinouts for 12 channel, 8 channel, and 4 channel cables, as well
as custom channel counts and mappings - Charges via USB port
- Up to 90 hours of continuous use on a single charge
OP480MT | |
Detection Modes | Manual, Auto Detect* |
Auto Detected Polarities | Type A,B,C, and Universal presets** plus customizable mappings |
Optical Interface | MTP/MPO APC male |
Internal Fiber | 62.5µm |
Detector Relative Sensitivity at 650nm | -30dB |
Compatible Source Wavelength Range | 650nm to 1050nm |
Internal Battery | Li-ion 900mAh |
Power Supply & Charge | +5VDC 1A, fast charge |
Communication & Charge | USB 2.0, charging up to 1A |
Dimensions | 8.5” x 3.5” x 1.2” |
Weight | 1.23lbs (0.56kg) |