Optical cable

Tech Optics supply a range of fibre optic cable to suit all optical fibre cabling needs. All cables are available in bulk (1km, 2km or 4km lengths) or cut to any specified length.

We also offer the value-added service of custom cable assemblies made up from a wide variety of connector types, both single mode and multimode to your specification.

  1. Patch cord/jump cord cable

    • Available in simplex and duplex
    • Compact, rugged construction
    • Low smoke zero halogen sheath
    • Ideal for patch leads, pigtails and test leads

    Downloads


  2. Specialist and large fibre-diameter patch cord/jump cord cable

    • 100/140μm; 200/230μm; 200/280μm; and other sizes available. Volition fibre, Rad hard fibre and other special fibres supplied - please enquire.
    • Compact Rugged Construction
    • Low Smoke Zero Halogen, PE, PU and other sheath materials available

  3. Uni-tube indoor-outdoor loose tube cable

    • Gel filled central tube provides protection against water penetration.
    • Dry, super absorbent polymers (SAPs) eliminate water migration in cable interstices
    • Suitable for lashed aerial, duct, underground conduit and indoor riser applications.

    Downloads


  4. Tight buffered internal external grade office distribution cable

    • Connectors assembled at the final patching centre, not at a hard-to-reach transition zone
    • Quicker termination process than conventional outdoor-rated cable
    • Ample link protection and no injected gel to clear prior to the termination process
    • Robust enough for long pulls and the most complex indoor configurations

    Downloads


  5. Steel armoured loose tube cable

    • Designed to withstand harsh external environments
    • Tough polyethylene jackets with carbon black protect the fibres from water and harsh sun
    • Armoured design for protection from rodents
    • Suitable for lashed aerial, duct or underground conduits
    • High technical performance reliability standards
    • One cable contains up to 432 fibres and meets high technical performance reliability standards

    Downloads


  6. Indoor-outdoor LSZH loose tube cable

    • Outstanding signal performance for educational, corporate and government applications
    • Reduces contractor cable prep work when going from an outdoor to indoor environment
    • Eliminates the need for outside-to-inside cross-connection, so greater reliability and reduced cost

    Downloads


  7. Loose tube outside plant general purpose cable

    • Designed to withstand temperature fluctuations and the external environment
    • Tough polyethylene jackets with carbon black protect fibres from water and harsh sun 
    • Gel-filled loose tubes for moisture protection 
    • Can be used in lashed aerial, duct or underground conduits
    • One cable contains up to 432 fibres and meets high technical performance reliability standards

    Downloads


  8. Riser breakout cable

    • Used for building wiring applications
    • Can be installed in walls, between floors and under data centre floors.
    • Built to withstand the tensile stresses present during installation by the contractor or assembler.

    Downloads