Tech Optics specialises in fibre optic termination. We produce a wide range of standard and bespoke fibre optic patch cord and pigtail assemblies made up from a wide variety of connector types, both singlemode and multimode, using our high quality cables.
All patch cord and pigtail assemblies are serialised for full traceability under our ISO 9001:2008 procedures, and are supplied with a test report.
Specifying your custom assembly
To specify your exact cable assembly requirements, please select the fibre size, number of fibres, connector type and assembly length from the table below.
Cable assemblies can be any length required; long lengths are supplied on reels with both the inner and outer cable ends exposed.
Multi-fibre assemblies can be supplied with a pulling boot fitted one end allowing a Premise Distribution Cable or Outside Plant Cable to be installed, the boot removed and connectivity made "plug and play".
In duplex assemblies SC and LC connectors can be supplied clipped (joined together) or unclipped (2 singles). Choose the correct style for your application.
Tech Optics identifier
(Standard for each code)
Fibre size
No. of fibres in assembly
Connector type for first end
Connector type for second end
Length in metres
m.
Note You can use the codes in the dropdown menu for the first-end connector in the second end, and vice versa. For example, a 62.5/125µm duplex ST to SC (using 2 simplex SC connectors), length 2 metres would have an Order Code: TO-B-02-33-41-2.
