MEDIA CONVERTERS

Tyco Electronics Ethernet Media Converters

10/100Mbit/s Media Converters

These very simple and easy to install Ethernet media converters support 10/100Mbit/s data rates, full/half duplex modes and Link Loss Forwarding. They allow users and workgroups to connect to remote access switches, routers and servers and PC NIC cards.

Support for the industry standard fibre connectors simplifies installation into new and legacy cabling systems.

The standalone converters can also be 19" rack-mounted in an AC powered enclosure to simplify installation in communication rooms where large numbers of fibre circuits are being terminated.
 

 Product Highlights

  • Fully compatible with 10Base-T, 100Base-T and the 100Base-FX standards
  • Available in both multimode and singlemode fibre formats
  • Supports full or half -duplex auto-negotiation together with N-Way capability
  • Auto-MDI/MDI-X eliminates need for RJ-45 crossover cables
  • Supports Link Loss Forwarding to simplify fault signalling
  • LED indicators for monitoring and diagnostics
  • Meets all relevant industry standards and International safety and EMC approvals
  • For higher data rates, Gigabit Ethernet fibre media converters also available, in standalone or rack-mounted format
  • Very simple to install and maintain - 'plug-and-play' and requires no technical knowledge
  • Compact size and very cost effective solution

Technical Specifications
Standards IEEE802.3, IEEE802.3u Ethernet at 10/100Mbit/s
Data Rates 10/Mbit/s and 100Mbit/s auto-negotiation (option to force 10Mbit/s full duplex for legacy systems)
UTP Duplex mode Full or half-duplex auto-negotiated and N-Way support
Max. forwarding rate 14,880pps (10Mbit/s) or 148,800pps (100Mbit/s)
Copper interface Shielded RJ-45 port with Auto MDI/MDI-X sensing
Fibre connections Multimode SC,ST or MT-RJ
Singlemode SC
Fibre types Multimode (50/125), 62.5/125 and Singlemode (9/125)
Fibre working range 2km for multimode, 15km for singlemode
Optical budget 12dB multimode, 13dB singlemode
Optical wavelength 1310nm
Forwarding method Store and forward to separate the two collision domains
Flow control Back-pressure and flow control
MAC table size 1K entries, auto-ageing and learning
Switch settings Auto-negotion or fixed 10Mbit/s operation
Fibre link full duplex
Link Loss Forwarding
Fail signal to UTP link or Fibre link
Diagnostic indicators • Power
• Speed (10/100M)
• UTP link activity
• Fibre link activity
• Full or half duplex UTP
• Full or half duplex fibre
Mounting methods Standalone or rack-mountable in 19” enclosure
Emissions Complies with FCC Class A and CE Class A.
Safety CE, UL
Temperature 0…45’C with humidity 10% to 90% non-condensing.
Dimensions 118mm x 84mm x 25mm (L x W x H)
Power consumption 4W at 5v DC using an external AC/DC power adapter
Power 9v DC using an external AC/DC power adapter
Values given in the above table are only for the 10/100Mbit/s Media Converter. For details on Gigabit Media Converters contact Tech Optics.

Ordering Information
0-1591020-7 1000BASE-TX to 1000BASE-SX (SC) Convertor MM Fibre
0-1591022-7 1000BASE-TX to 1000BASE-LX (SC) Convertor SM Fibre
0-1591024-7 10/100BASE-TX to 100BASE-FX (SC) Convertor MM Fibre
0-1591026-7 10/100BASE-TX to 100BASE-FX (ST) Convertor MM Fibre
0-1591028-7 10/100BASE-TX to 100BASE-FX (MT-RJ) Convertor MM Fibre
0-1591029-7 10/100Base-TX to Single Fibre Converter Module (1550nm)
0-1591030-7 10/100BASE-TX to 100BASE-FX (SC) Convertor SM Fibre
0-1591031-7 10/100Base-TX to Single Fibre Converter Module (1310nm)
0-1591032-7 10 Slot 19 inch Chassis Based Media Conversion Unit With PSU
0-1591034-0 Spare/redundant Power Supply Unit

For more information or to order email Tech Optics or call +44(0) 173 277 0466