 ST Connector and Coupler |
 |
High performance ST compatible connectors |
|
|
Quick cure epoxy type | |
|
|
Pre-radiused PC finish | |
|
|
Zirconia ceramic ferrule | |
|
|
Choice of strain relief boot |
These Tyco/AMP ST connectors are intended for epoxy and polish
type terminations. The termination is procedure is quick and straightforward
using two part heat cure or room temperature cure epoxies, or
can be carried our using the AMP Quickcure adhesive (one part
adhesive that cures in around 20 seconds).
A variety of strain relief boots, either for 900µm pigtail
fibre or for 1.8mm, 2.4mm or 3mm patchcord cable, are available
and in different colours where channel identification is required.
The zirconia ceramic ferrule is mounted in a polymer body with
a metal bayonet housing.
ST couplings (in-line adaptors) are available with either a polymer
sleeve, for low cost multimode applications, or with a beryllium
copper sleeve for higher performance and a ceramic sleeve for
singlemode use.
| Order Code | Description |
| 492458-3 | ST Multimode Connector, crimp sleeve & dust cap, bulk packed |
| 502580-2 | ST Singlemode Connector, crimp sleeve & dust cap, individually packed and with a 3mm yellow cable boot |
| 503628-1 | 900µm strain relief boot for pigtails |
| 501457-8 | 3mm cable strain relief boot - Black |
| 1-501457-2 | 3mm cable strain relief boot - Blue |
| 1-501457-0 | 3mm cable strain relief boot - Red |
| Order Code | Description |
| 502370-3 | ST coupler, polymer sleeve |
| 504021-2 | ST coupler, BeCu sleeve |
| 502750-1 | ST coupler, ceramic sleeve |
| Order Code | Description |
| 503337-1 | ST Hand Polishing Bush |
| 58433-4 | Pro-Crimper hand tool for ST connectors |
| FMA-ST | Westover microscope adaptor |
