The cable Spider Fan Out Kit allows multicore central loose tube cables (uni-tube) to be directly terminated, either in the workshop or on site once the cable has been installed. The optical fibres remain continuous and there is no splicing. Mechanical strain relief is provided for both the multicore cable and the individual fibre tails. Once the Fan Out Kit has been installed, the individual fibre tails may be terminated with the users choice of connector in the usual way appropriate to that connector.

The 12 fibre Fan Out Kit will accept multicore cable from 6mm diameter to 10.5mm diameter
The 24 fibre Fan Out Kit will accept multicore cable from 8mm diameter to 12.5mm diameter

Tooling Required: Just a screw driver and wrench (spanner). There are 4 screws to hold the outer housing over the assembly and the cable gland to be tightened into the housing and onto the multicore cable. Other tools will be required for terminating the connectors onto the fibre tails. Assembly is simple and quick, requiring just a few minutes per cable end.